How To Replace A Garbage Disposal | DIY Plumbing | The Expert Plumber – Plumbers Majestic

How To Replace A Garbage Disposal | DIY Plumbing | The Expert Plumber

How To Replace A Garbage Disposal | DIY Plumbing | The Expert Plumber

How To Replace A Garbage Disposal | DIY Plumbing | The Expert Plumber

How To Replace A Garbage Disposal | DIY Plumbing | The Expert Plumber

Do you understand how to replace a waste unit? In this video clip I'' m gon na reveal you exactly how as well as we'' re. gon na do it in ten secs. I'' m Roger Wakefield, LEED AP, The Expert technician. Invite back to another wonderful video. If you'' ve not been here before and also you desire.
to find out all points as a house owner, or a realty agent or a purchaser beginning now.
by clicking the subscribe switch and also calling the bell so you put on'' t miss out on out on anything. In this video we ' re gon na chat about altering.
out a trash .How do you set up a

How To Replace A Garbage Disposal | DIY Plumbing | The Expert Plumber

brand-new waste ? So we ' re gon na assume that'you ' ve already. got a installed, and we'' re gon na obtain the old one as well as put it in the brand-new.
one. Currently as you can see on our arrangement right here, we have.
the cooking area tap off so it'' s off the beaten track. That way, actually, all you are seeing is.
the drain pipeline and the waste disposal unit itself. So what we will certainly do is we will certainly detach it.
first, eliminate the disposal as well as then mount the brand-new one and also we'' re gon na do that right
. now. So as you see right here we'' ve obtained a simulated sink constructed.
up with the disposal currently installed so what we'' re gon na do is'we ' re in fact going. to eliminate the disposal. In order to change it, we wear ' t have any kind of. power on this set.
The initial thing you wish to make certain is that. your disposal is either unplugged or disconnected from its electric

How To Replace A Garbage Disposal | DIY Plumbing | The Expert Plumber

input.So you may need to transform the breaker off or.
you may need to unplug it relying on if yours is hardwired or otherwise. Action top is make certain that the drains pipes.
pulled on the within as well as there'' s no water inside of it. So we understand that there might be some standing.
thin down below in the drain pipe, however truly there'' s no water in this one in any way. So we understand that we ' re secure.
So what we would normally do is put a bucket. under right here and uncouple the p-trap.
Currently with this mounted on the wall, what you ' ll. do with a pail under it, is undo both nuts, reduced the p-trap, drainpipe it right into the bucket,. then you ' ve obtained space to get this out.
Since this piece will really stay placed. onto the drainpipe, on the wall surface we ' re going to take that apart. Then we ' re mosting likely to detach the remainder of. the drain piping down right here to actually obtain it off the beaten track. So we'' re gon na chill out all these slip joint.
nuts as well as draw all this piping out of the way.You desire

How To Replace A Garbage Disposal | DIY Plumbing | The Expert Plumber

How To Replace A Garbage Disposal | DIY Plumbing | The Expert Plumber

to ensure that you save the washing machines.
or o-rings on the inside, to ensure that whatever returns with each other effectively and doesn'' t leak. To in fact separate the disposal now, to.
take it up loose from the sink, you'' ve got brackets up below. It'' s where the disposal has a flange on it. that in fact increases and secures. So what we'' re gon na do is we ' re going to sustain. this from below and stick a screwdriver or wrench or something in there as well as unlock it.So now we can really draw the disposal away.
from the sink itself. Currently this flange is something that if you'' re. placing it in the disposal I advise going on and also placing in a brand-new flange. Now if you'' ve obtained an unique colored one and also.
you acquire the same brand name disposal, possibilities are you can hook it up and it'' s still mosting likely to. be all right, you'' re not going to have any type of problem. However I'' m gon na go on and also take this one out.
just to show you just how to change it. And we'' re gon na reverse the 3
firm. screws. You ' re gon na push it up as well as'there '
s a metal. ring in there. You ' re gon na take this screwdriver to assist. you get that ring off, this way you can pull the flange off and you ' ve got the three sided.
flange that goes on the bottom.And as you can see

How To Replace A Garbage Disposal | DIY Plumbing | The Expert Plumber

How To Replace A Garbage Disposal | DIY Plumbing | The Expert Plumber

, the screws tighten up. right here and that ' s what presses it up as well as makes that remain in location. So after that we ' re gon na press it up. As well as you men see, you ' ve additionally got a paper. o-ring down right here on the bottom.
So this really takes the flange out from. the sink itself so currently you can take your new one as well as placed it back in. So prior to you place the brand-new disposal on, you. might have to take the old pigtail off and put the brand-new one on, or place it on the new disposal.What you ' re gon na do is you ' re

mosting likely to pull. your wires obtain them to'where you can get to them. Beware removing the electric wires,. you intend to ensure not to tear anything, your setup items on the side here. And you want to make certain you'' ve got a means. to lock those cables in there. So what I do is open this up, slide them in.
with the threads below due to the fact that you recognize they'' re gon na string right into the disposal.So what I do initially is stick in my cords. and obtain them over to where I want them, in this way I can attach the ground and also I can hook. up the power. It doesn ' t matter which wire you'hook to which,. as long as you get the ground right. Just see to it that you obtain a great electrical. link and it doesn ' t come loose. Remember this trash disposals obtained an electric motor. in it so it ' s going to relocate, it'' s sort of vibrate, it'' s going'to turn, it'' s kind of. turn, it ' s going to do the points that it does, so you intend to ensure you get a very. good link. Then what I do is tuck my cord nuts in obtain.
everything tucked in by doing this I understand it'' s in a great place. Waste disposal unit setup is really something.
simply about any property owner can do if they make the effort and also if they have the right tools. So what I'' m doing is, I ' m still cleaning up the.
the putty off the the old flange because really your brand-new one won'' t have any kind of on there, however. you still want this paper ring up against the very lower of it.And after that what I'' m going to do is I ' m gon na
. stick this up, transform the method I desire it. Because I'' m gon na line this as much as where these.
3 screws hit on the outer parts of there. Due to the fact that what I'' m gon na do is put this up,. get it set the means I such as and also tighten up these screws. Which'' s what ' s going to push this up and. draw the flange to make certain it seals off and doesn'' t leak. In order to do that,'I ' ve got to put this. with each other and afterwards put this ring on, and also as you can see this ring has a split in it. So it'' s going to walk around and complete that.
groove, right there. As well as when it secures in I'' m going to obtain it turned.
the precise manner in which I desire it and also I'' m mosting likely to start screwing these in finger tight.As you tighten

these screws down, you want.
to tighten them down equally by doing this it aids maintain your waste disposal directly while.
that'' s up under right here. On a stainless steel sink, the sink being.
very thin, you'' ll need to take these screws nearly all the method. If I had a cast-iron sink, or an acrylic,.
or a porcelain, or anything like that that could be a little thicker, these screws probably.
wouldn'' t enter there as much as they have here.So currently we'' ve obtained every little thing below the new flange. set up, prepared to repair. So what you'' re going to do, if your disposal.
is not assembled yet, you'' ve got the gasket and afterwards you ' ve obtained the ring. Place it in and also in fact put your gasket down,.
and also it'' ll enter and snap in location. Now the one point that I intend to inform you.
right here, and we put on'' t have it knocked out right here, there'' s a plug in here and if you ' re. hooking your dish washer as much as drain through your disposal you intend to take a hammer and also.
a screwdriver and knock that plug out, and then remember to reach down within right here and also.
obtain it out.If you wear'' t, that can in fact jam your garbage.
disposal. So once you get it the means you want it, you.
transform it to the direction that it'' s going to go, and we understand we want this pointing over.
towards the drainpipe pipe due to the fact that we understand where our p-trap is gon na be. So you obtain it aligned, you line these flanges.
up with the opening here, push it up in area and turn it, obtain it right where you desire it,.
and afterwards turn it till it secures. That'' s really the hardest component about setting up. a waste disposal unit. Because currently all we'' re gon na do is begin putting.
the pieces back with each other. So remember the o-rings that I told you to.
make certain you maintained? See how they'' re beveled? You desire the point to go down towards the.
base, so what you'' re gon na do is you ' re gon na slide your slip nut up, place your washing machine.
on as well as glide it up just a little. And we'' re gon na do the exact same point over here.Once we get

that together, we know this is.
currently the proper size due to the fact that we'' re returning the specific very same size disposal that we.
secured. You'' re going to obtain it, obtain everything lined.
up, and placed it with each other. You intend to make certain you'' ve got loss below,.
so see to it that this rises as for it'' s expected to before you tighten it down. Now we'' re going to place our p-trap back together. Which we understand it'' ll go like that. As you can see the drainpipe arm here already.
has the diagonal washer on it and it'' ll go right into the side that has the bevel. I have actually seen individuals turn about placed it the.
other means if they need it to be a much deeper trap, ideally you won'' t requirement to. Remember this piece is currently on the wall,.
so essentially what you'' re gon na do is stick this on as well as slide it up.And that'' s actually all it requires to set up. a trash disposal. So as you can see, mounting a brand-new rubbish. disposal is not that large of a problem. Simply make certain that you'' re installing one.
because you need one. If your waste disposal unit was humming, obstructed.
up, or anything like that perhaps you didn'' t need one. Perhaps you just require to unjam it or maybe you.
need to strike the reset button. The reset buttons right down right here on bottom,.
and also as you saw whenever I had it over right in the center, that'' s where the unjam wrench.
goes to aid you take treatment of your disposal. If you'' ve altered out your very own disposal, or.
you'' ve unjammed it, or serviced it, please leave a remark down below and also allow us know. Thanks for seeing if you intend to learn.
much more regarding , look into several of the other wonderful videos we'' ve done on The Specialist.
, and also bear in mind struck the subscribe switch currently as well as ring the bell so you wear'' t miss out.
on anything, and we'' ll see you on the next video clip if you put on'' t obtain purged.

As found on YouTube

Free Coupon Download; Up To 80% OFF

No response yet on How To Replace A Garbage Disposal | DIY Plumbing | The Expert Plumber

Leave a comment

will not be published

Touch to Call!
Call Us
%d bloggers like this: