HOW TO REMOVE AND INSTALL A TOILET - PLUMBING TIPS
HOW TO REMOVE AND INSTALL A TOILET - PLUMBING TIPS
HOW TO REMOVE AND INSTALL A TOILET - PLUMBING TIPS
– Hey there as well as welcome to today'' s. plumberparts.co.uk video. Today I ' m mosting likely to tell you just how to remove as well as mount your commode. This is a closed paired cistern toilet as well as it'' s going to be absolutely mental. First up, remove the lid to your bathroom. Next off, transform off the supply of water. To make certain the water.
supply is appropriately separated simply purge the bathroom.
as well as you must observe that it isn'' t filling out.( flushing sound) So, as you can see there, not loading up. You'' ll currently see that there'' s about an inches worth of water. in all-time low of the cistern. Currently, it'' s really convenient that you get this out before you do anymore job otherwise you'' ll get water anywhere. Now, thankfully for me, I have a wet vac, so I might just vacuum it out, but you'' re possibly not. going to have that facility. The ideal point to do is.
order on your own a towel, put your towel therein, have a pail as well as keep wringing your.
towel out into the bucket.Do the same
HOW TO REMOVE AND INSTALL A TOILET - PLUMBING TIPS
HOW TO REMOVE AND INSTALL A TOILET - PLUMBING TIPS
with the toilet bowl too and make certain you simply got.
the tank and the digestive tract as empty of water as you possible can get prior to you move onto the next step. Eliminate all the water.
that you potentially can. (vacuum running) Now to the commode bowl. When.
you do it, wear some gloves, although it'' s probably mosting likely to be your very own poo juice anyway. (vacuum cleaner running) Currently you'' ve vacant the.
cistern and also the commode bowl of water we can move on to the next phase which is disconnecting the supply of water to the toilet itself. It'' s really very easy to see on this toilet it ' s simply this adaptable little bit right here.
So, you get a pair of adjustables. and also simply loosen up that off. You could require a small towel just to capture any type of water that ' s still. staying up in the shutoff, just to make certain we.
wear'' t have a little flood. Fortunately, there'' s. nothing in there. Great. A lot of tanks have a method of really holding the tank to the wall. On this right here we'' ve. obtained these 2 screws here.Remove them and
HOW TO REMOVE AND INSTALL A TOILET - PLUMBING TIPS
after that we can. proceed to the next
phase. Now it ' s time to remove'the. cistern from the bathroom itself. So you drop below the cistern. You ' ll locate two little. wingnuts. Undo those and you
' ll have the ability to tear the. tank off from the toilet. Undo the one on this side too. So we'' ve reversed those.
two wingnut beneath. We should now just have the ability to.
life up the system, like so. Take it outside. Since we'' ve eliminated. the system from the toilet we really need to obtain. the toilet up itself.
We ' re fortunate in this residence. due to the fact that the toilet drain heading out the
back is. on a versatile multiquick. Currently it'' s possibly finest you go. and purchase one of these on your own trigger they'' re actually very easy.
to fit following time around, instead than really doing.
inflexible 4 inch pipe job. Most toilets are held.
down by a number of screws and also a bit of silicon,.
so get rid of those screws, cut the silicon and also you need to be able to raise the bathroom up and out of the way.Just watch me do it. So you obtain your screws here. (drilling noise) (exploration sound) When you ' ve eliminated the'screws carefully remove the soil pipeline.
off the back of the commode. You must be able to.
eliminate it and also take it away. Something I'' d recommend at this factor is obtaining some paper, wear'' t look, hold the dirt pipeline as well as look. way as well as simply press your paper in there'so there ' s no odor. Incidentally, you may need.
therapy after doing this bit. Currently that you'' ve obtained the. bathroom out of the way we can now prepare the.
area for the new commode. Simply give anywhere a good clean. Get all the particles out of the means. Just like a great deal of restroom work, me as the plumbing, I currently need to wait for the tilers ahead.
in and do their bit, get the floor down, prior to I.
can actually fit the toilet.I ' ll
HOW TO REMOVE AND INSTALL A TOILET - PLUMBING TIPS
HOW TO REMOVE AND INSTALL A TOILET - PLUMBING TIPS
be back below in a week, however, for you it will seem like a second. We'' ve obtained the brand-new toilet here currently. The floor'' s been laid so we'' re ready to place the commode back. in to the old pipeline work, wed all that correctly. The first thing we'' ve. reached do is really repair the commode to the flooring as well as this one'' s got
the. internal L shaped clamps. Now, a great deal of toilets, what you need to do is screw 2 screws down through the porcelain right into the floor.Because we ' ve obtained these L shaped'clamps we ' ve obtained to do a little'little measuring to make certain they ' re in the ideal place. So, the initial thing we.
do is get the commode right into the setting that.
we desire it to be in. Push the waste back on. We'' re really fortunate we'' ve. obtained that adaptable waste. Push the toilet back to the wall surface, exactly to where you desire it to be. Then we get a tiny pencil.
and make a little mark next to each one of the holes. Detach the bathroom and the waste from where it needs to be. Next, put the toilet upside-down and also get a number of screws just to hold this about in place. Alright, grab yourself a tape step and gauge the distance in between both openings to the centres.That ' s about
12 and a half there. Now we gauge between these 2 to obtain our centres right here, which is 22. So, I'' ll centre for. the entire toilet itself is around 11 as well as we determine out 12 as well as a fifty percent, divided by 2.
from that centre line there. To ensure that'' s 6.25 and we understand precisely where to pierce as well as affix our 2 L shaped clamps. Screw in and also restrain.
each one of your brackets. (boring audio) Well, I'' ve obtained the mendings in yet prior to we continue.
simply get some silicon, clear or whatever you.
can, whatever you'' ve obtained, and simply run that around the
. inside of this beast right here. With any luck, when you.
put the commode back on you'' ll definitely not have any kind of leakages. So currently we'' re ready to put the commode back.Let ' s simply raise that over those 2 there. Now'' s most likely the very best time
. to get your waste back on. Press that back right into placement. An excellent fit, if I.
wear'' t mind saying so myself. Now we can place the screws back in and then focus on.
placing the tank on and after that afterwards.
silicon around the base. I'' ve got some little screws below. We simply placed the screw directly via this safety sheath here, take it approximately the bathroom.
and after that screw it in. (boring audio) We get our wonderful cap and also.
pop that over like that.And currently we
have a look at exactly how we really fix the bathroom system to.
the commode basin itself. Currently, it seals around here. This is where the flush comes out as well as this will certainly seal around the toilet. If you look closely at the screws you'' ll see they ' ve got. little square end on them and also they slot just under there thus and after that on the other side of the bathroom we have two wingnuts and also two.
washing machines to tighten up that up as well as squash this up against the commode. So let'' s do that currently. So we lay our washing machine on right here. Simply like that. Currently we need to go via the rather agonising process of placing.
2 on from beneath. You try to establish them up.
so their all ready to go, simply like that, and after that.
take a look and really feel around.Once you ' ve gone through the pain and also misery and also utter fear.
of what you'' ve simply done you can then focus on in fact fixing the cistern itself.
trigger it'' s still shaky. You must have 2 screws that. go right into the back of the wall surface and also a blob of silicon at the back to make sure it doesn'' t relocation.
So very first things first,. obtain your silicon weapon and also run a blob down the back, just to load it out and.
secure it when it dries out. Just like this, put two screws, couple of safety.
washing machines around each one, and afterwards simply screw them in lightly, they wear'' t demand to be to tight, these, they ' re just steadying the toilet. (boring noise) So, we'' ve linked.
the system to the wall. What we'' re mosting likely to do now. is figure out the water system as well as the actual installation of the toilet itself will certainly be finished.Alright, so next up
we. reached take this cap off
as well as get this pipeline here that ' s not rather lengthy enough to go into this right here. So you ' re going to require to understand how to do a little of soldering or you'' re going to require to recognize just how to make use of compression fittings. I'' ve done videos on both of those. If you return to the network and also look you should be able to discover the information you need there. What I'' d constantly do on this certain bit is when I take this off put a.
little seclusion valve in right here, to ensure that if there'' s any type of problems you don ' t have to turn. the whole system off.You can simply isolate the toilet itself, function on it there and after that. So as you can see, nicely mounted shutoff, very good and also cool, and also, they'' ve obtained a wonderful seclusion so any problems they can just turn the.
commode off by itself. I wish you located this.
training video handy. If you require any longer.
assistance on the various other parts of in fact doing a toilet,.
return to our network where you'' ll additionally discover.
videos on exactly how to instal a button waste, how.
to seal down a commode, and likewise, exactly how to fit a bathroom seat. If you require anymore help, allow.
us understand through our channel. Please subscribe and favourite as well as also most likely to our.
Twitter and also our Facebook and claim hi there as well as.
remember visit our website plumberparts.co.uk if you.
require to grab any kind of bits.I ' ll see you all soon. I.
hope you had a worthless time as well as I wish you'' ve enjoyed.
mounting this bathroom as well as I'' ll see you in the following video. Hold tight.